A/T Clutch Pressure Control Solenoid Valve B and C Replacement

  1. Disconnect the A/T clutch pressure control solenoid valves B and C connectors.
  1. Remove the A/T clutch pressure control solenoid valves B and C.
  1. Remove the ATF joint pipes (D), O-rings (E), and gasket (A).
  1. Clean the mounting surface and fluid passages of the A/T clutch pressure control solenoid valves B and C and transmission housing.
  1. Install the new gasket on the transmission housing, and install the ATF joint pipes.
  1. Install new O-rings over the ATF joint pipes.
  1. Install new A/T clutch pressure control solenoid valves B and C.
  1. Check A/T clutch pressure control solenoid valves B and C connectors for rust, dirt, or oil, then connect the connectors securely.