Balancer shaft

Item
Measurement
Qualification
Standard or New
Service Limit
Balancer shaft
Journal diameter
No. 1 journal, rear shaft
23.938−23.950 mm (0.9424−0.9429 in.)
23.92 mm (0.942 in.)
No. 2 journal, front and rear shafts
23.938−23.950 mm (0.9424−0.9429 in.)
23.92 mm (0.942 in.)
No. 3 journal, front and rear shafts
32.949−32.961 mm (1.2972−1.2977 in.)
32.93 mm (1.296 in.)
Journal taper
0.005 mm (0.0002 in.) max.
———
End play
0.070−0.135 mm (0.0028−0.0053 in.)
0.15 mm (0.006 in.)
Shaft-to-bearing clearance
No. 1 journal, rear shaft
0.050−0.082 mm (0.0020−0.0032 in.)
0.10 mm (0.004 in.)
No. 2 journal, front and rear shafts
0.050−0.082 mm (0.0020−0.0032 in.)
0.11 mm (0.004 in.)
No. 3 journal, front and rear shafts
0.060−0.120 mm (0.0024−0.0047 in.)
0.15 mm (0.006 in.)