Maintenance Schedule for Normal Conditions

Follow the Normal Conditions Maintenance Schedule if the severe driving conditions specified in the Severe Conditions Maintenance Schedule do not apply.

Service at the indicated distance or time whichever comes first
Inspect front and rear brakes

Check the brake pad and disc thickness. Check for damage or cracks front pad, front disc, rear pad, rear disc

Check the brake linings for cracking, grazing, wear, and contamination

Test drive (noise, stability, dashboard operation)
Check expirty date for IMS bottle (if equipped)
Visually inspect the following items:

Check for correct installation and position, check for cracks, deterioration, rust, and leaks

Check tightness of screws, nuts, and joints. If necessary, retighten
  Check rack grease and steering linkage. Check   the boot for damage and leaking grease

Check the bolts for tightness

Check all dust cover for deterioration and damage

Check the boot and boot band for cracks

Check rack grease
  Check the master cylinder, proportioning   control valve, and ABS or VSA modulator and   leakage
All fluid levels and condition of fluids
  Check levels and check for leaks. If necessary,   and engine coolant, MTF  , brake fluid,    power steering fluid, and   windshield fluid
  Check the catalytic converter heat shield,   exhaust pipe, and muffler for damage, leaks,   and tightness
  Check fuel lines for loose connections, cracks,   and deterioration. Retighten loose connections   and replace any damaged parts
Tyre condition

Every 40,000 km (25,000 miles)
At 100,000 km (62,500 miles) or 5 years, then every 60,000 km (37,500 miles) or 3 years
Replace engine coolant
Every 120,000 km (75,000 miles) or 8 years
Replace manual transmission fluid
Every 3 years

Use only DOT 3 or DOT 4 brake fluid. We recommend genuine Honda Brake Fluid

Check that brake fluid level between the upper and lower marks on the reservoir
Every 30,000 km (18,750 miles) or 1 year