Maintenance Schedule for Normal Conditions - European Models

Follow the Normal Conditions Maintenance Schedule if the severe driving conditions specified in the Severe Conditions Maintenance Schedule do not apply.

Service at the indicated distance or time whichever comes first
Inspect front and rear brakes

Check the brake pad and disc thickness. Check for damage or cracks front pad , front disc , rear pad , rear disc

Check the brake linings for cracking, grazing, wear, and contamination

Check lights alignment
Test drive
  Check for road stability, noise, vibration, and dashboard   operation
Check expiry date for temporary repair kit bottle
Visually inspect the following items:

Check for correct installation and position, check for cracks, deterioration, rust, and leaks

Check tightness of screws, nuts, and joints. If necessary, retighten
Tie-rod ends, steering gearbox, and boots
Suspension components

Check the bolts for tightness

Driveshaft boots

Check the boot and boot band for cracks

Brake hoses and lines (including ABS/VSA)
All fluid levels and condition of fluids
Exhaust system
  Check the exhaust pipe and muffler for damage, leaks, and   tightness K20Z2 engine , K24A3 engine  
Fuel lines and connections
Tyre condition
  Check for pressure, puncture, cuts, and irregular thread   wear

Every 40,000 km (25,000 miles)
Every 120,000 km (75,000 miles)
Every 120,000 km (75,000 miles) or 8 years
Replace manual transmission fluid
At 120,000 km (75,000 miles) or 8 years, then every 80,000 km (50,000 miles) or 4 years
Replace automatic transmission fluid
  Use genuine Honda ATF-Z1    K20Z2 engine,    K24A3 engine
At 200,000 km (120,000 miles) or 10 years, then every 100,000 km (60,000 miles) or 5 years
  Use genuine Honda All Season Antifreeze/Coolant Type 2
Every 3 years

Use only DOT 3 or DOT 4 brake fluid. We recommend genuine Honda Brake Fluid

Check that brake fluid level is between upper and lower marks on the reservoir
Every year
Inspect vehicle corrosion:
  refer to the Body Repair Manual

External Paintwork and panel Corrosion Check

Under body Corrosion Check