Maintenance Schedule for Normal Conditions - Australia and New Zealand Models
87,000miles(7year)

Follow the Normal Conditions Maintenance Schedule if the severe driving conditions specified in the Severe Conditions Maintenance Schedule do not apply.



Service at the indicated distance or time whichever comes first
Inspect front and rear brakes

Check the brake pad and disc thickness. Check for damage or cracks front pad , front disc , rear pad , rear disc

Check lights alignment
Test drive
  Check for road stability, noise, vibrations, and dashboard operation
Visually inspect the following items:

Check for correct installation and position, check for cracks, deterioration, rust, and leaks

Check tightness of screws, nuts, and joints. If necessary, retighten
Tie-rod ends, steering gearbox, and boots
Suspension components

Check the bolts for tightness

Driveshaft boots

Check the boot and boot band for cracks

Brake hoses and lines (including VSA)
All fluid levels and condition of fluids
  Check levels and check for leaks. If necessary, add engine coolant  , MTF, ATF, brake   fluid, windshield fluid
Exhaust system
Fuel lines and connections


Every 10,000 km (6,250 miles) or 1 year
At 200,000 km (120,000 miles) or 10 years, then every 100,000 km (60,000 miles) or 5 years
Replace engine coolant
At 120,000 km (75,000 miles) or 6 years, then every 80,000 km (50,000 miles) or 4 years
Replace automatic transmission fluid
Every 3 years
Replace brake fluid

Use only DOT 3 or DOT 4 brake fluid. We recommend genuine Honda Brake Fluid

Every 30,000 km (18,750 miles) or 1 year
Every 10,000 km (6,250 miles)
Rotate tyres
  Check tyre inflation and condition at least once one month