Maintenance Schedule for Normal Conditions
125,000miles(10year)

Follow the Normal Conditions Maintenance Schedule if the severe driving conditions specified in the Severe Conditions Maintenance Schedule do not apply.



Service at the indicated distance or time whichever comes first
Inspect front and rear brakes

Check the brake pad and disc thickness. Check for damage or cracks front pad , front disc , rear pad , rear disc

Check the brake linings for cracking, grazing, wear, and contamination

Check lights alignment
Test drive
  Check for road stability, noise, vibration, and dashboard   operation
Check expiry date for temporary repair kit bottle (if equipped)
Inspect drive belt
  Replace every 20,000 km (12,500 miles) or 1 year when the   customer drives primarily in urban areas that have high   concentrations of soot in the air, under dusty conditions,   or the air flow from the heating and cooling system   becomes less than normal.
Visually inspect the following items:

Check for correct installation and position, check for cracks, deterioration, rust, and leaks

Check tightness of screws, nuts, and joints. If necessary, retighten
Tie-rod ends, steering gearbox, and boots
  Check rack grease and steering linkage. Check the boot for   damage and leaking grease

Check the bolts for tightness

Check all dust cover for deterioration and damage
Driveshaft boots


Check rack grease
Brake hoses and lines (including ABS/VSA)
All fluid levels and condition of fluids
Exhaust system
  Check the exhaust pipe and muffler for damage, leaks, and   tightness K20Z2 engine ,    K24A3 engine
Fuel lines and connections
Tyre condition
  Check for pressure, puncture, cuts, and irregular thread   wear


Every 40,000 km (25,000 miles)
Replace spark plugs K20Z2 engine , K24A3 engine
Every 120,000 km (75,000 miles)
Replace spark plugs K20Z2 engine , K24A3 engine
Every 120,000 km (75,000 miles) or 8 years
Replace manual transmission fluid (MTF)
At 120,000 km (75,000 miles) or 8 years, then every 80,000 km (50,000 miles) or 4 years
Replace automatic transmission fluid (ATF)
  Use genuine Honda ATF-Z1    K20Z2 engine ,    K24A3 engine
At 200,000 km (120,000 miles) or 10 years, then every 100,000 km (60,000 miles) or 5 years
Replace engine coolant
Every 3 years
Replace brake fluid
  Use only DOT 3 or DOT 4 brake fluid. We recommend   genuine Honda Brake Fluid. Check that brake fluid level   between the upper and lower marks on the reservoir  
Every year
Inspect vehicle corrosion:
  refer to the Body Repair Manual

External Paintwork and panel Corrosion Check

Under body Corrosion Check