Maintenance Schedule for Normal Conditions - EU
180,000km(9year)

Follow the Normal Conditions Maintenance Schedule if the severe driving conditions specified in the Severe Conditions Maintenance Schedule do not apply.


Service at the indicated distance or time whichever comes first

Check the brake pad and disc thickness. Check for damage or cracks.

Check the calipers for damage, leaks, and tightness.
  Check the position of the headlights.
Test drive (noise, stability, dashboard operation)
Visually inspect the following items:

Check for correct installation and position, check for cracks, deterioration, rust, and leaks.

Check tightness of screws, nuts, and joints. If necessary, retighten.

Check rack grease and steering linkage.

Check the boot for damage and leaking grease.

Check the bolts for tightness.

Check all dust covers for deterioration and damage.

Check the boot and boot band for cracks.

Check rack grease.
  Check the master cylinder and VSA modulator-control unit   and leakage.
All fluid levels and condition of fluid
  Check levels and check for leaks. If necessary, add.






  Check the catalytic converter heat shield, exhaust pipe,   and muffler for damage, leaks, and tightness.

Check fuel lines for loose connections, cracks, and deterioration.

Retighten loose connections and replace any damaged parts.
Tyre condition


Every 40,000 km (25,000 miles)
Every 120,000 km (75,000 miles) or 8 years
  Use genuine Honda MTF.
Every 3 years

Use only DOT 3 or DOT 4 brake fluid. We recommend genuine Honda Brake Fluid.

Check the brake fluid level is between the upper and lower marks on the reservoir.
Every year
Inspect vehicle corrosion:
  refer to the Body Repair Manual

External paintwork and panel corrosion check

Under body corrosion check