Summary of Contents for Honda Accord 1986-310 Service Manual - Page 36

  • Honda Accord 1986-310 Service Manual - Page 36

    Engine -Engine Mounting Fiye engine mounts are provided, three tor supporting the engine weight, and two lunctianing as stopper rubbers to maintain engine anilude against drive torque reaction and inertial force acting on the engine when driving. Front beam dampers are also provided to reduce humming noise in the cabin. The first three mounts represent the front and rear maunt rubbers installed on the lrbnt and rear beams and the engine side rubber installed on the left side of the cylinder block. The latter two mounts are the torque rod, which extends horizontally from the rear oi the engine, and the wind stopper rubber installed right under the engine. A complex type moum is newly employed for the front beam mounts There are two chambers located in the upper and lower part of the mount and filled with liquid. An orifi is provided to connect the chambers sd that damping iarce takes place when large amplitude is applied. Driving comfort is further improved while insulating the cabin from engine noise and Vibration. WIND STOPPER RUBBER ENGINE MOUNT RUBBER FRONT BEAM ORIFICE ENGINE SIDE RUBBER FRONT BEAM MOUNT 2-8