Summary of Contents for Honda Accord 1987 Service Manual - Page 15

  • Honda Accord 1987 Service Manual - Page 15

    - When disconnecting a coupler, pull it on rrom the mating coupler by holding on bolh couplerst - Never try to disconnect couplers by pulling on their wires. x if?“ - Before connecting couplers, check to see thst the terminals are in place and are not bent or distorted. ‘ lnserl couplers fully untll may will no longer 90. ~ Some Couplers have locking (abs that mun be aligned and engaged securely. Dont use Mre harnesses wflh a loose wire or cou- Plan in? Efljx - Place the plastic cover over the mating coupler alter reconnecting. Also check that the end is not X inverted. - Belore connecting check each connector cover ior breakage Also make sure that the lernala connec- tor is tihgt and not pried open rrorn the previous Insert male connectors inlu the female connectors lully until they will no longer go, - Be sure that plastic cover is placed aver the con- nectian. ~ Don’t place the opening of each plastic cover facing up. - Secure wires and wire harnesses lo the lrame with their respectlve wire bands at the designated locar tlons. Tighten the bands so that only the insulated surlaces contact Ihs wires or wire harnesses X 0 ll - A loose wire harness or cable can be a hazard to safety Alter clamping, check each wire tor securi- ty in ils clamp. A® O x MM ~ Do not squeeze wrres against the weld or nugget of its clamp when a weld-on clamp is useot O X L @— (ccnt‘dl 1-13