Summary of Contents for Honda Accord 1990-1993 Service Manual - Page 19

  • Honda Accord 1990-1993 Service Manual - Page 19

    Preparation of Work —Electrical (cont’d) Since new type connectors are used, connection and dise connection of them should be done paying attention to the ollowlng precautions. A Because all the connectors except terminal of 1-P are equipped with push-down type locks, unlock them first before disconnecting the connectors. On the connectors installed on the bracket a pull (we lock is equipped between the bracket and the connector. Some connectors of this type can not be disconnected unless they are removed from their brackets. When disconnecting, check their shapes. 0n the bracket mounted connector wttn dual locks. remove the connector from the bracket before discom necting. LOCKING PAWL Push the locking tab to disconnect. LOCKING TABS ~ Pull up the locking lab to remove the connector from the bracket Pull-up to disengag. 5 CONNECTOR uncut When disconnecting locks, first press In the conneclor lightly (to provide clearance to the locktng device). then operate the tab fully and remove the connector in the designated manner. LOOKING PAWL % When disconnecm’lg a connector. null rt off trom the mating coupler hy holding on both connectors. Never try to disconnect connectors by pulling on therr wires. GOOD %0 No coon No coon