Summary of Contents for Honda Accord 1993-62SN700 Service Manual - Page 40

  • Honda Accord 1993-62SN700 Service Manual - Page 40

    Engine Removal/Installation — (contd) 1 1r Remove the starter cable and transmission ground cable. SVARTER CABLE TRANSMISSION GROUND CABLE s x I.25 mm 9 ram (0.9 harm. 6 x 1.0 mm 7 Ila-m 1o N~m l1ro kw». 7 II:th 12. Relieve fuel pressure by slowly loosening the ser— vice bolt on the fuel rail about one turn {see section 1 1). Do nor smoke while we ing on the fuel systam. Keep away Imm work area. Drain Mal only imo an approvod contalnev. CAUTION: O Eofore dlsconnecllng any fuel line, relieve the null pressure as described above. 0 Place a shop towel over (Ila luel [all In pvavent pressurized fuel hum splaying over the .nglno. 13. Remove the fuel lead hose and fuel return hose, BANJO NUT SERVICE Eon 22 N‘m (2.2 Ilgvm. WASHERS |5 Mr. (1,5 kgqn. 16 lbrm Replace. 1 1 Ib-fi] FUEL FEED HOSE FUEL RETURN HOSE 14. Remove the left Side engine wire harness and ground cable. a x 1.0 mm LEFT SIDE ENGINE 10 mi (1.0 kg-m. WIRE HARNESS 7 lb...) 6 )1 1.0 mm 10 N-m (1.0 kg»m. 7Ih-ftl GROUND CABLE 15. Remove the throttle cable by loosening the lockuut, then slip the cable end out of the throttle linkage. NOTE: I Do not loosen the adiusting nut. 0 Take care not to bend the cable when removing it. Always replace any kinked cable with a new one. 0 Adjust the thlottle cable when installing (see section I 1 ). CABLE END LOGKNUT ADJUSTING NLIT 16. Remove the engine wire harness connectors. ter» minal and clamps on the light side of engine compartment.