Summary of Contents for Honda Accord 1994 CE1 CE2 Service Manual - Page 234

  • Honda Accord 1994 CE1 CE2 Service Manual - Page 234

    7. Check for continuity between the B11 terminal of 9. Test Harness B andjhe No. 4 terminal of the SR3 main harness 47F connector. Turn the ignition switch 0N (II), and wait for six seer ends. Measure the voltage between the No. 12 ter minal [1-) and body ground H. TEST HARNESS B ()7an — swoosoo Al2zlosls tzslsle 12 13 u ts it I71! m ll it u u I5 is n l! sRs MAIN NAnNEss t 4— P CONNECTOR View om wire side - If there is continuity, the sns unit is faulty, Replace it and recheck the voltages according to the chart on page 233-1 - If there is no continuity, there is an open in the sas main harness. Replace the sas main har~ View lrom wrre side 0 If voltage is more than 35 V, the SR5 indicator circuit is taulty (in the gauge assembly). Replace the gauge assembly, and recheck the voltages according to the chart on page 2354;. ll voltage is less than 8.5 V. the dashboard wire harness lor the main wire harness) is faulty. Replace it and recheck the voltages according lo the chart on page 2339. ness, and recheck the voltages accordlng to (he chart on page 2339. ac Reconnect the SHS main harness A-P connector to the mam Wire harness. Disconnect the dashboard wire harness 14—? connector from the gauge assemr bly. DASHBOARD WIRE HARNESS I 4-9 CONNECTOR 233-1 7