Summary of Contents for Honda Accord 1996 62SN723 Service Manual - Page 38

  • Honda Accord 1996 62SN723 Service Manual - Page 38

    Engine Removal/Installation lei wnanNG - Make sure inks and safety stands are placed properly and hoist brackets are attached to the correct posi— tlons on the engine. 0 Make sure the car will not roll on stands and all while you are working und-r it. CAUTION: - Use fender covers to avoid damaging paimeo surfaces. 0 Unspecified items are common. s Unplug the wiring connecton carer-lily while holding the connector portion to avoid damage. O Mark all wiring and hose: to avoid miseonnection, Also, be sure that they do not contavt other wiring or hoses, or interfere with other pans. 1. Secure the hood as far open as possible. 2. Disconnect the battery negative terminal first, then the positive terminal. 3. Remove the radiator cap. Use can when removing the radiator cap lo avoid scaldlng by hot coolant or stem. 4, Praise the hoist to full height. 5. Remove the front Wheels and the splash shield. SPLASH SHIELD 6 x 1.0 mm lo N-m (1.0 kg-m, 7 Ilrll) 6. Loosen the drain plug from the radiator. 7. Drain the transmission oil or fluid. Reinstall the drain plug usmg a new washer, 8, Drain the engine oil. Reinstall the drain bolt using a new washer. CAUTION: Do not overtighlen the drain boil. 9. Lower the hoist. 10. Remove the intake air duct and air cleaner housing. 5 x 1.0 mm In N-m (1,0 kg-m, 7 lb-fr) AIR CLEANER HOUSING 11. Remove the resonalor cover. RESONATOR COVER lNYAKE AIR DUCT (cant’dl 5-3