Summary of Contents for Honda Accord 1996 62SN724 Service Manual - Page 47

  • Honda Accord 1996 62SN724 Service Manual - Page 47

    34. Remove 5 bolts securing camshan tuning belt rear cover to engine. 35. Remove timmg belt rear cover. 12M1319 v l 36. Remove Allen boll securing tensnoner pulley to mounting plate. 37. Remove tensioner. 33. ll injection pump timing belt is to be refitted, mark direction at rotation on Dell. 39. Remove injection pump timing belt. CAUTION: Ease timing belt off gears using fingers only. Metal levers may damage the belt and years. Do not rotate engine with timing belt removed and cylinder head fitted. Timing belts must be stored and handled with care. Always store a timing belt on its edge with a bend radius greater than 50 mm (2.0 in). Although the belt has a service life of 135,000 km, (84,000 miles), an existing belt should only be refitted if it has completed less than 65,000 km, (42,000 miles). 40. Remove and discard camshaft gear retaining bolt. 41. Remove camshaft gear. CAUTION: If the srntered years have sub/sated to prolonged or! contamination. they must be soaked in a solvent bath and thoroughly washed with solvent before relmneni. Because of the porous ENGINE 10%] construction of sintered malerlal. oil impregnated in the gear will emerge’and contaminale a new ball. 12M1320 42. Remov tlrning belt back plate to cylinder head. 43. Remove back plate. 12M1 321 M1 Disconnect 2 main harness to engine harness mulliplugst 45. Disconnect multiplug lrom oil pressure switch. 46. Remove terminal nut securing lead to No.2 glow plug. 47. Disconnect lead from glow plug. 48. Release injector needle lift sensor multiplug from injection pump bracket and disconnect. REPAIRS 9