Summary of Contents for Honda Accord CE1 CE2 Service Manual - Page 50

  • Honda Accord CE1 CE2 Service Manual - Page 50

    Fluid Level — Checking/Changing Checking NOTE: Check the fluid level with Ihe engine at normal operating temperature (the radiator fan comes on). 1. Park the car On level ground. Turn offthe engine. 2. Remove the dlpstick (yellow loop) lrom the trans- mission, and wipe it with a clean cloth. 3. Insert the dipstick into the transmission. DIPSTICK (YELLOW LOOP) 4. Remove the dipstick and check the fluid level. It should be between the upper and lower marks. 9 met ‘— UPPER MARK 4— LOWER MARK 5. II the level is below the lower mark, add fluid into the tube to bring it to the upper mark. Use Genuine Honda ATF PREMlUM (Automatic Transmission Fluid-PREMIUM) or an equivalent quality DEXRON II or III ATF only. 6. insert the dipstick back into the transmission. Chlnglng I. Bring the transmission up to normal operating teme peralure (lhe radiator fan comes on) by driving the car. Park the car on level ground. turn the engine off, and then remove the drain plug. 2. Reinstall the drain plug with a new sealing washer, then relill the transmission to the upper mark on the dipstick, Automatic Transmission Fluid Canal; 24 I l2.5 US wt. 2.1 Imp 111) M diam;an 6.0 l (3.3 US qt, 5.3 llnp qt) ll ovuhaul ,—// 9/ SEALING WASHER Replace. DRAIN PLUG 18 I I5 mm is Mm l5.o kghfl. 36 Ibml 14-2