Summary of Contents for Honda Accord 1986 SE 300 Service Manual - Page 15

  • Honda Accord 1986 SE 300 Service Manual - Page 15

    Preparation of Work — Electrical (contd) - After clamping, check each harness to be certain that it is not Interfemng with any moving or sliding parts of the vehicle. - Keep wire harnesses away from the exhaust pipes and olher hot Darts, ~ Always keep a safe distance between wire hare nesses and any heated parts. Keep suutcient distance- - Do not bring wire harnesses in direct contact with sharp edges or eprners, ~ Also award contact with the projected ends of bolts, screws and other fasteners. - Route harnesses so they are not pulled (an! or slackened excessively. . Protect wires and harnesses with a tape or tube if they are in contact with a sharp edge or corner. ) ““ Clean the attaching surface thoroughly it a plaster is used. Use a spirit wipe H necessary. O x Seat grommets in their gmoves properly. see Du not damage the insulator when connecting a Wire. Do not use wires or hamssses with a broken insula- tor. Repair by wrapping with a protective tape or replace with new ones if necessary. After installing parts, make sure that wire harnessr as are no: DlnChedt 1-14