Clean all parts in solvent and dry with compressed air. Inspect the parts for wear or damage. Replace any worn or damaged parts. Always install…
Author: Jack
Remove the bolt (Item 1) and nut. Remove the cover (Item 2) [Figure 40-201-9]. Remove the bolt (Item 1) [Figure 40-201-10], washer and spacer. Remove…
Remove the bucket. (See Operation & Maintenance Manual for the correct removal procedure.) Support the boom with a hoist (Item 1) [Figure 40-201-1] and release…
Install the bushings (Item 1) and seals (Item 2) [Figure 40-200-10] (both sides). Install the O-ring (Item 1) [Figure 40-200-11] (both sides). Use grease to…
Remove the nuts (Item 1) and bolt (Item 2) [Figure 40-200-6]. Remove the pin (Item 1) [Figure 40-200-7]. Remove the link (Item 1) and O-rings…
Remove the bucket. (See Operation & Maintenance Manual for correct removal procedure. Support the boom with a hoist [Figure 40-200-1]. Remove the nuts (Item 1)…
Remove the bolts (Item 1) and the latch (Item 2) [Figure 40-190-3]. Remove the nuts (Item 1) and bracket (Item 2) [Figure 40-190-4]. Remove the…
Support the tailgate and remove the nuts (Item 1). Remove the gas strut (Item 2) [Figure 40-190-1]. Remove the clip (Item 1) [Figure 40-190-2] and…
Remove the bucket. (See Operation & Maintenance Manual for correct removal procedure.) Lower the clamp to the ground. Remove the snap ring (Item 1) [Figure…