All new machines with keyless start arrive at Bobcat dealerships with the keypad in locked mode. This means that a password must be used to…

The Keyless Right Panel allows the user to view information concerning the operation of Bobcat attachments. Attachments are listed alphabetically. Press the exit button to…

Icon Identification Make selection by pressing the SELECTION BUTTON adjacent to the icon [Figure 60-180-1]. Examples More Examples The Keyless Right Panel is easy to…

When installing the RPM sensor, turn the rpm sensor (Item 1) [Figure 60-170-1] in until it makes contact with the engine flywheel. Turn the jam…

The flywheel RPM sensor has a magnet located on the end of the sensor which senses breaks between the ring gear teeth, the sensor relays…

The current setting can be saved by pressing and holding the PRESS TO OPERATE LOADER button (Item 1) for three seconds. [SEt] (Item 3) will…

NOTE: Changes CANNOT be performed until the seat bar is lowered, the engine is started and the PRESS TO OPERATE LOADER button is pressed to…

Steering Drift Compensation can be used to reduce steering drift to maintain a desired travel path. Examples of applications where this feature can be used:…

Place the loader on jackstands. (See Procedure on Page 10-10-1.) Operator must be in the seat and the seat bar down. Close the cab door.…

The controller uses a calibration sequence to optimize the control system. The optimizing ensures full spool stroke (full flow) while preventing over stroke (loading) of…