Remove the glow plug lead (Item 1), breather hose (Item 2), and valve cover bolts (Item 3) [Figure 60-80-8]. Remove the valve cover (Item 4)…

Remove the timing gearcase cover. (See Timing Gearcase Cover Removal And Installation on Page 60-100-1.) Make sure the timing marks are in correct alignment when…

Adjust the valve clearance with the engine stopped and cold. The correct valve clearance is 0,18 – 0,22 mm (0.007 – 0.0087 in) [Figure 60-80-5].…

Remove the air cleaner. (See Removal And Installation on Page 60-40-1.) Disconnect the negative (-) cable from the battery. Remove the nut and wire harness…

Disconnect the glow plug wire harness and connecting strap. Use an ohmmeter to check the glow plugs [Figure 60-80-1]. Touch one probe to the end…

The tool listed will be needed to do the following procedure: OEM1064 – Injector Nozzle Tester Connect the injection nozzle to a nozzle tester [Figure…

The tool listed will be needed to do the following procedure: OEM1064 – Injector Nozzle Tester Set the injection nozzle to a nozzle tester, and…

The tools listed will be needed to do the following procedure: MEL4200 – Injector Nozzle Tester MEL4201 – Injector Nozzle Tester Adapter Set Connect the…

Remove the air cleaner. (See Removal And Installation on Page 60-40-1.) Remove the nut and wire harness (Item 1) [Figure 60-70-24]. Remove the nuts (Item…

The governor serves to keep the engine speed constant by automatically adjusting the amount of fuel supplied to the engine according to changes in the…