Doors

Door Weatherstrip Replacement

20-12

Door Upper Seal Replacement


NOTE:
  • Take care not to scratch the door.
  • Use a clip remover to remove the clips.
  1. At the front-pillar, remove the door stop mounting bolt (A).

Fastener Location

A : Bolt, 1B : Clip, 1C : Clip, 17

  1. Detach the clips (B, C), then remove the door weatherstrip (D).
  2. Install the weatherstrip in the reverse order of removal and note these items:
  • Replace any damaged clips.
  • Make sure the weatherstrip is installed in the holder (E) securely.
  • Apply liquid thread lock to door stop mounting bolt before installation.
  • Check for water leaks, refer to the '01 CIVIC Shop Manual, P/N 62S5A00 on this CD (see step 7 on page 20-25).

NOTE:
  • Take care not to scratch the door.
  • Use a clip remover to remove the clips.
  1. Remove these items:
  • Power mirror, as necessary (see page 20-16)
  • Door sash trim (see page 20-11)
  1. Detach the door weatherstrip clips (A, B), then remove the door upper seal (C).

Fastener Location

A : Clip, 1B : Clip, 2

  1. Install the seal in the reverse order of removal and note these items:
  • Replace the clip if it is damaged.
  • Make sure the upper seal is installed in the holder (D) securely.
  • Check for water leaks, refer to the '01 CIVIC Shop Manual, P/N 62S5A00 on this CD (see step 7 on page 20-25).