Intake Manifold and Exhaust System

Exhaust Pipe and Muffler Replacement (cont'd)

9-4  

NOTE: Use new gaskets and self-locking nuts when reassembling.

D17A5 engine:

  1. GASKET, Replace.
  2. MUFFLER
  3. 8 x 1.25 mm, 22 Nm (2.2 kgf/m, 16 lbf/ft), Replace.

    Tighten the bolts in steps, alternating side-to-side.

  4. HEAT SHIELD
  5. EXHAUST PIPE B
  6. GASKET, Replace.
  7. EXHAUST PIPE A
  8. 8 x 1.25 mm, 22 Nm (2.2 kgf/m, 16 lbf/ft), Replace.

    Tighten the bolts in steps, alternating side-to-side.

  9. GASKET, Replace.
  10. SELF-LOCKING NUT

    10 x 1.25 mm, 33 Nm (3.4 kgf/m, 25 lbf/ft), Replace.