Rear Upper Arm Removal/Installation
|1.||Raise the rear of the vehicle, and support it with safety stands in the proper locations.|
|2.||Remove the rear wheel.|
|3.||Position a floor jack at the connecting point of the trailing arm (A) and the knuckle (B).|
|4.||Remove the upper arm mounting bolts (A) and flange bolt (B).|
NOTE: Use new upper arm mounting bolts and a new flange bolt during reassembly.
|5.||Remove the upper arm (C) from the vehicle.|
|6.||Install the upper arm in the reverse order of removal, and note these items:|