Parking Brake Cable Replacement
- The parking brake cables must not be bent or distorted. This will lead to stiff operation and premature failure.
- Refer to the Exploded View as needed during this procedure.
Rear Disc Brake Type
|1.||Release the parking brake lever fully.|
|2.||Remove the parking brake cable clip (A) from the brake cable (B).|
|3.||Disconnect the parking brake cable from the lever (C).|
|4.||Remove the parking brake cable mounting hardware, then remove the cable.|
|5.||Install the parking brake cable in the reverse order of removal, and note these items:|
Rear Drum Brake Type
|1.||Remove the brake drum and shoes, and disconnect the parking brake cable from the parking brake lever.|
|2.||Remove the flange bolt (A) and parking brake cable (B) from the backing plate (C).|
|3.||Reinstall the parking brake cable in the reverse order of removal, and note these items:|