Brake Master Cylinder Disassembly
NOTE: The illustrations show LHD/ABS type.
|1.||Remove the rod seal from the master cylinder.|
|2.||Disconnect the reservoir tank hose (A).|
|3.||Remove the snap ring (A) while pushing in the secondary piston (B).|
|4.||Remove the reservoir union (A) and the reservoir grommets (B) from the master cylinder.|
NOTE: When reservoir union and master cylinder body are separated, replace the reservoir grommets with new ones.
|5.||Remove the stop pin (C) while pushing in the secondary piston (D).|
|6.||Remove the secondary piston (A), primary piston (B) and piston guide (C).|
|7.||Remove the reservoir seal (A) from the reservoir cap (B).|
|8.||Remove the strainer (C) from the reservoir (D).|