Splash Shield Replacement
NOTE: Take care not to scratch the body.
|1.||Remove the splash shield (A).|
|-1 ||Remove the clips (B) that secure the front inner fender (C) and splash shield to the body.|
|-2 ||From under the front bumper (D), remove the clips (E, F).|
|-3 ||From under the body, remove the clips (G).|
|-4 ||Release the hooks (H) of the splash shield, then pull the splash shield out.|
NOTE: To remove the clips B, E, F and G, pry the inner the clip up at the edge near the line (I) on its head.
|2.||Install the splash shield in the reverse order of removal, and note these items:|
- Check for damaged or stress-whitened clips, and if necessary, replace them with new ones.
- Push the clips into place securely.