Door Molding Replacement

NOTE:
  • Be careful not to pry too far or you may bend the molding.
  • Put on gloves to protect your hands.
  • When removing components, use the handy remover set or equivalent.

1.Remove these items:


2.Release the clips (A), and gently pry the front door molding (B) or rear door molding (C) away from the door while separating the adhesive tape (D, E, F, G).

Adhesive tape (D): Thickness 1.2 mm (0.047 in.) Width 5 mm (0.19 in.) Length 30 mm (1.18 in.) 
Adhesive tape (E): Thickness 1.2 mm (0.047 in.) Width 10 mm (0.39 in.) Length 930 mm (36.61 in.) 
Adhesive tape (F): Thickness 1.2 mm (0.047 in.) Width 10 mm (0.39 in.) Length 580 mm (22.83 in.) 
Adhesive tape (G): Thickness 1.2 mm (0.047 in.) Width 5 mm (0.19 in.) Length 24 mm (0.94 in.) 

 

3.Install the moldings in the reverse order of removal, check for damaged or stress-whitened clips, and if necessary, replace them with new ones.