Front Grille Cover Replacement

  • When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
  • Take care not to scratch the rear bumper and body.

1.Remove the front fender trim from both sides.

2.Remove the clips (A, B) by carefully pull the rear of the front grille cover (C) up, then remove the cover by releasing the front edge of the cover from the front grille (D). Take care not to scratch the body.

NOTE: To remove the clip, pry the inner clip up at the edge near the line (E) on its head.


3.Install the cover in the reverse order of removal, and note these items:

  • Check for damaged or stress-whitened clips, and if necessary, replace them with new ones.
  • Push the clip portions into place securely.