Trunk Lid Opener Cable/Fuel Fill Door Opener Cable ReplacementSRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.
- Put on gloves to protect your hands.
- Take care not to scratch the body and related parts.
|1.||Remove these items:|
|2.||Pull the carpet back as needed.|
|3.||Release the opener cable (A) from the clips (B). Remove the cushion tape (C).|
|4.||While pinching the hooks (A) from inside the vehicle, remove the grommet (B) from the body.|
|5.||Release the hook (A), then remove the grommet (B) from the fuel fill door latch (C).|
|6.||Remove the fuel fill door opener cable from inside the body.|
|7.||Detach the opener cable junction box (A) from the body.|
|8.||Disconnect the trunk lid opener cable (B) from the trunk lid latch (C).|
|9.||Release the trunk lid opener/fuel fill door opener cable from the clips.|
|10.||Remove the trunk lid opener/fuel fill door opener cable from the vehicle. Take care not to kink the cable.|
|11.||Install the opener cable in the reverse order of removal, and note these items:|