Interior Trim Removal/Installation - Trunk Area - With Trunk Floor Spacer
With Trunk Floor Spacer
- Put on gloves to protect your hands.
- Take care not to bend or scratch the trim and panels.
- When removing components, use the handy remover set or equivalent.
|1.||With fixed type rear seat: Remove the seat-back.|
|2.||With fold down type rear seat: Fold the rear seat-back forward.|
|3.||Replace the fasteners (A), then remove the spare tyre lid (B).|
|4.||Remove the trunk lid weatherstrip near the trunk rear trim panel.|
|5.||Detach the clips, and release the hooks (A) by pulling the trunk rear trim panel (B) up, then remove it.|
|6.||Remove the clips, then remove the left trunk floor spacer (A) and right trunk floor spacer (B).|
|7.||Remove the clips (A, B), then remove the trunk side trim panel (C). Release the wire harness (E) from the slit (F) in the trim panel.|
|8.||If necessary, remove the trunk tool box (A).|
|9.||Install the trim in the reverse order of removal, and note these items:|