Instrument Pad Removal/Installation

  • Take care not to scratch the instrument pad and related parts.
  • When removing components, use the handy remover set or equivalent.

1.Remove these items:

2.Remove the screws.


3.Detach the clips along the lower edge of the instrument pad (A).


4.Detach the clips along the upper edge of the instrument pad (A). Gently pull out the instrument pad to release the hooks (B) from the holder (C) of the gauge control module.


5.Install the instrument pad in the reverse order of removal, and note these items:

  • Check for damaged or stress-whitened clips, and if necessary, replace them with new ones.
  • Push the clips into place securely.