|Headlights become very hot during use; do not touch them or any attaching hardware immediately after they have been turned off.|
Before adjusting the headlights:
- Park the vehicle on a level surface.
- Make sure the tire pressures are correct.
- The driver or someone who weighs the same should sit in the driver's seat.
|1.||Clean the outer lens so that you can see the center (A) of the headlights.|
|2.||Park the vehicle in front of a wall or a screen (A).|
|3.||Turn the low beams on.|
|4.||Determine if the headlights are aimed properly.|
Measure the height of the headlights (A).
The lights should reflect 52 mm (2.1 in.) below headlight height (B).
|5.||If necessary, open the hood and adjust the headlights to local requirements by turning the vertical adjuster.|