Interior Light Switch Test/Replacement
NOTE: The interior light switch is built into the sunroof switch, and it switches the front individual map light OFF and DOOR positions.
|1.||Remove the front individual map lights.|
|2.||Disconnect the sunroof switch 10P connector (A) and map light 3P connector (B).|
|3.||Remove the sunroof switch (C).|
|4.||At the sunroof switch 10P connector, check for continuity between the No. 1 and No. 8 terminals.|
|5.||If the continuity check is not as specified, replace the illumination bulb (D) or the switch.|
|6.||Install the switch and light in the reverse order of removal.|