Rear Seat Armrest Beverage Holder Replacement

For Some Models

  • Take care not to tear the seams or damage the seat covers.
  • When prying components, use the handy remover set or equivalent.

1.Using a trim tool, push on the bottom ribs (A) of the rear hooks (B) to pull up the beverage holder (C), then release the hooks from the wire (D).


2.Release the front hooks (A) from the wire (B), then remove the beverage holder (C).


3.Install the beverage holder in the reverse order of removal. Make sure the front hooks are installed securely to the wire, then push down on the beverage holder and install the rear hooks into the wire securely.