Ignition Switch ReplacementSRS components are located in this area. Review the SRS component locations, and precautions and procedures before performing repairs or servicing.
|1.||Make sure you have the anti-theft code for the audio, then write down the audio presets. Make sure the ignition switch is OFF.|
|2.||Disconnect the negative battery cable.|
|3.||Remove the driver's dashboard lower cover, and the steering column covers.|
|4.||Disconnect the 7P connector (A) from the ignition switch (B).|
|5.||Remove the two screws and the ignition switch.|
|6.||Install in the reverse order of removal.|
|7.||After reconnecting the battery, enter the anti-theft code for the audio, then enter the customer's audio presets and reset the clock.|