Windshield Wiper Arm/Nozzle Adjustment

Wiper arms stop position


1.When the wiper arms stop at automatic stop position, confirm the wiper arms are at the standard position.

a: Position at about 29 mm (1.1 in.) from the top of cowl cover (A) 
b: Position at about 106 mm (4.1 in.) from the top of cowl cover (A) 

Washer nozzle position


2.When you jet the washer fluid, confirm 50 % or more of the jet fluid splashes down within the slash area. If there are not standard positions, adjust the nozzles.

c: Position at about 302 mm (11.8 in.) from the top of black ceramic (B) at lower windshield 
d: Position at about 302 mm (11.8 in.) from the top of black ceramic (B) at lower windshield 
e: Position at about 250 mm (9.8 in.) from the windshield center line (C)