DTC Troubleshooting: 11-01
|DTC 11-01:||Low/High Voltage for IG1 (Initial diagnosis)|
|1.||Clear the DTC using the HDS.|
|2.||Turn the ignition switch OFF.|
|3.||Start the engine.|
|4.||Wait at least 60 seconds.|
Does the EPS indicator come on?
YES - Go to 5.
NO - Check for loose wires or poor connections. If the connections are good, the system is OK at this time.n
|5.||Verify the DTC.|
Is DTC 11-01 indicated?
NO - Perform the appropriate troubleshooting for the code indicated.n