DTC Troubleshooting: 34-01
|DTC 34-01:||Power Relay Stuck ON (When Ignition switch is OFF)|
|1.||Clear the DTC using the HDS.|
|2.||Turn the ignition switch OFF.|
|3.||Turn the ignition switch ON (II).|
Does the EPS indicator come on?
YES - Go to 4.
NO - Check for loose terminals or poor connections. If the connections are good, the system is OK at this time.n
|4.||Verify the DTC.|
Is DTC 34-01 indicated?
YES - Check for loose terminals in the EPS control unit connectors, and repair if necessary. If no poor connections are found, replace the EPS control unit.n
NO - Perform the appropriate troubleshooting for the code indicated.n