DTC Troubleshooting: 35-03, 35-05
|DTC 35-03:||EPS Control Unit Internal Circuit (EPS CPU) (Internal diagnosis/regular diagnosis)|
|1.||Clear the DTC using the HDS.|
|2.||Turn the ignition switch OFF.|
|3.||Turn the ignition switch ON (II).|
Does the EPS indicator come on?
YES - Go to 4.
NO - Check for loose terminals or poor connections. If the connections are good, the system is OK at this time.n
|4.||Start the engine, and wait 10 seconds or more.|
|5.||Verify the DTC.|
Is DTC 35-03 or DTC 35-05 indicated?
YES - Check for loose terminals in the EPS control unit connectors, and repair if necessary. If no poor connections are found, replace the EPS control unit.n
NO - Perform the appropriate troubleshooting for the code indicated.n