DTC Troubleshooting: 52-Bx, 52-Cx, 52-Dx

DTC 52-Bx (52-B0 to 52-B9, 52-BA to 52-BF),
52-Cx (52-C0 to 52-C9, 52-CA to 52-CF),
52-Dx (52-D0 to 52-D9, 52-DA to 52-DF):
 
  

NOTE: Before troubleshooting any of these DTCs, check the battery/system voltage. If the voltage is low, repair the charging system or replace the battery before troubleshooting the SRS. If the battery/system voltage is now OK, ask the customer if the battery ever went dead. A dead battery may trigger one of these DTCs.

1.Erase the DTC memory.

2.Turn the ignition switch ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes off.

Does the SRS indicator stay on, and is DTC 52-Bx, 52-Cx, or 52-Dx indicated?


YES - Replace the SRS unit.n


NO - Intermittent failure, system is OK at this time. Go to Troubleshooting Intermittent Failures. If another DTC is indicated, go to the DTC Troubleshooting Index.