DTC Troubleshooting: 55-Dx, 55-Ex, 55-Fx

DTC 55-Dx (55-D0 to 55-D9, 55-DA to 55-DF),
55-Ex (55-E0 to 55-E9, 55-EA to 55-EF),
55-Fx (55-F0 to 55-F9, 55-FA to 55-FF):

NOTE: Before troubleshooting any of these DTCs, check the battery/system voltage. If the voltage is low, repair the charging system or replace the battery before troubleshooting the SRS. If the battery/system voltage is now OK, ask the customer if the battery ever went dead. A dead battery may trigger one of these DTCs.

1.Erase the DTC memory.

2.Turn the ignition switch ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes off.

Does the SRS indicator stay on, and is DTC 55-Dx, 55-Ex, or 55-Fx indicated?

YES - Replace the SRS unit.n

NO - Intermittent failure, system is OK at this time. Go to Troubleshooting Intermittent Failures. If another DTC is indicated, go to the DTC Troubleshooting Index.