DTC Troubleshooting: 57-1x, 57-2x
|DTC 57-1x (57-10 to 57-19, 57-1A to 57-1F), |
57-2x (57-20 to 57-29, 57-2A to 57-2F):
NOTE: Before troubleshooting any of these DTCs, check the battery/system voltage. If the voltage is low, repair the charging system or replace the battery before troubleshooting the SRS. If the battery/system voltage is now OK, ask the customer if the battery ever went dead. A dead battery may trigger one of these DTCs.
|1.||Erase the DTC memory.|
|2.||Turn the ignition switch ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes off.|
Does the SRS indicator stay on, and is DTC 57-1x or 57-2x indicated?
YES - Replace the SRS unit.n
NO - Intermittent failure, system is OK at this time. Go to Troubleshooting Intermittent Failures. If another DTC is indicated, go to the DTC Troubleshooting Index.