DTC Troubleshooting: 27-23

DTC 27-23:  Steering Angle Sensor Counter Malfunction

1.Turn the ignition switch ON (II).

2.Clear the DTC with the HDS.

3.Turn the ignition switch OFF, then turn it ON (II) again.

4.Turn the steering wheel from lock to lock.

5.Check for DTCs with the HDS.

Is DTC 27-23 indicated?

YES - Replace the steering angle sensor.n

NO - Intermittent failure, the system is OK at this time. Check for loose terminals between the steering angle sensor 5P connector and the VSA modulator-control unit 37P connector. Refer to intermittent failures troubleshooting.n