DTC Troubleshooting: 27-24

DTC 27-24:  Steering Angle Sensor Exchange Malfunction

1.Turn the ignition switch ON (II).

2.Turn the steering wheel at 1 turn. Check the STEERING ANGLE in the VSA DATA LIST with the HDS.

Is there about 288-432 °?

YES - Intermittent failure, the system is OK at this time. Check for loose terminals between the steering angle sensor 5P connector and the VSA modulator-control unit 37P connector. Refer to intermittent failures troubleshooting.n

NO - Replace the steering angle sensor.n