A/C Refrigerant Oil Replacement

Recommended PAG oil: SANDEN SP-10

  • P/N 38897-P13-003: 120 mL (4 fl·oz, 4.2 Imp·oz)
  • P/N 38898-P13-003: 250 mL (8 1/3 fl·oz, 8.8 Imp·oz)
  • P/N 38899-P13-A01: 40 mL (1 1/3 fl·oz, 1.4 Imp·oz)

Add the recommended refrigerant oil in the amount listed if you replace any of the following parts.

  • To avoid contamination, do not return the oil to the container once dispensed, and never mix it with other refrigerant oils.
  • Immediately after using the oil, reinstall the cap on the container, and seal it to avoid moisture absorption.
  • Do not spill the refrigerant oil on the vehicle; it may damage the paint; if it gets on the paint, wash it off immediately.

A/C condenser . 50 mL (1 2/3 fl·oz, 1.8 Imp·oz) 
Evaporator . 40 mL (1 1/3 fl·oz, 1.4 Imp·oz) 
Line or hose . 10 mL (1/3 fl·oz, 0.4 Imp·oz) 
Receiver/Dryer . 10 mL (1/3 fl·oz, 0.4 Imp·oz) 
Leakage repair . 25 mL (5/6 fl·oz, 0.9 Imp·oz) 
A/C compressor . Since the oil separator is equipped inside the compressor for this vehicle, oil drainage is unnecessary at the time of compressor replacement.