Clutch Pedal and Clutch Pedal Position Switch Adjustment

NOTE:

1.Lift up the carpet (A). At the insulator cutout, measure the pedal height from the right side of the pedal pad (B).

 

2.Loosen locknut (A), and back off the clutch pedal position switch or clutch pedal adjusting bolt (B) until it no longer touches the clutch pedal (C).

 

3.Loosen locknut (D), and turn the push rod (E) in or out to get the specified height (F), stroke (G), free play (H) and disengagement height (I) at the clutch pedal.

Clutch Pedal Stroke: 130-140 mm (5.12-5.51 in.) 
Clutch Pedal Free Play: 
10-18 mm (0.39-0.71 in.) 
Clutch pedal Height:  
  LHD MODEL: 157 mm (6.18 in.) 
  RHD MODEL: 158 mm (6.22 in.) 
Clutch pedal Disengagement Height: 
  LHD MODEL: 77 mm (3.03 in.) 
  RHD MODEL: 78 mm (3.07 in.) 

4.Tighten locknut.

5.With the clutch pedal released, turn the clutch pedal position switch or clutch pedal adjusting bolt in until it contacts the clutch pedal.

6.Turn the clutch pedal position switch or clutch pedal adjusting bolt in an additional 3/4 to 1 turn.

7.Tighten locknut.

8.Press the clutch pedal to the floor.