Fuel Pressure Regulator Replacement
|1.||Remove the fuel tank unit.|
|2.||Remove the bracket (A).|
|3.||Remove the ground ring (B).|
|4.||Remove the fuel pressure regulator (C).|
|5.||Install the regulator in the reverse order of removal with new O-rings (D) and bracket. When installing the fuel tank unit, align the marks on the unit and the fuel tank.|
NOTE: Coat the O-rings with clean engine oil.
Do not pinch the O-rings during installation.
Never apply brake fluid, vegetable oil, or alcohol-based oil to the O-rings.