|1.||Remove the ECM/PCM.|
|2.||Remove the under-hood fuse/relay box.|
|3.||Remove the fuses (A).|
|4.||Using two flat-tip screwdrivers, release the tabs (A), and pry up the fuse/relay box base (B) from the fuse/relay box housing (C).|
NOTE: Make sure the terminals (D) are not bent or damaged.
|5.||Turn the housing over, then remove the screw (A).|
|6.||Turn the housing over again, then remove the ELD (A).|
|7.||Install the ELD in the reverse order of removal.|