Torque Converter Housing Countershaft Bearing Replacement

Special Tools Required
Adjustable bearing remover set (  07JAC-PH80000)
 

Handle driver (  07749-0010000)
 
Driver attachment, 62 x 68 mm (  07746-0010500)
 


1.Remove the countershaft bearing with the special tool.

 

2.Install the ATF guide plate (A).

 

3.Install the new countershaft bearing (B) in the housing with the special tools; install the bearing outer race surface in height (C) of 0-0.03 mm (0-0.001 in.) above the housing surface (D). Do not install the bearing exceeding 0.03 mm (0.001 in.) high from housing surface.