A/T Interlock System - Park Pin Switch ReplacementNOTE:
- The A/T gear position indicator panel light harness is not available from the park pin switch; replace the A/T gear position indicator panel light harness, park pin switch, and the connector as a set.
- The illustration shows the LHD model; RHD model is similar.
|1.||Remove the shift lever assembly.|
|2.||Remove the park pin switch (A) while pressing the park pin switch lock (B).|
|3.||Remove the A/T gear position indicator panel light and socket (A) from the indicator panel (B).|
|4.||Remove the harness clamp (C), and remove the park pin switch/A/T gear position indicator panel light connector (D) from the shift lever assembly/bracket base (E).|
|5.||Install the new park pin switch (F) on the shift lever, and install the new A/T gear position indicator panel light and socket in the indicator panel.|
|6.||Tie the harness together into bundle with new harness clamp, then install the harness clamp on the shift lever bracket base.|
|7.||Route the harnesses along the harness guides, and install the new connector in the bracket base.|
|8.||Install the shift lever assembly.|