DTC Troubleshooting: P0335 (88-2)
|DTC P0335:||Crankshaft Position (CKP) Sensor No signal|
NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review General Troubleshooting Information.
|1.||Clear the DTC with the HDS.|
|2.||Start the engine.|
|3.||Check whether the DTC P0335 is indicated in the DTCs/Freeze Data in PGM FI Mode Menu with the HDS.|
Is DTC P0335 indicated in the PGM FI system?
NO - Go to 4.
|4.||Check whether the DTC P0335 is indicated in the DTCs/Freeze Data in A/T Mode Menu with the HDS.|
Is DTC P0335 indicated?
YES - Update the PCM if it does not have the latest software, or substitute a known-good PCM, then recheck. If the symptom/indication goes away with a known-good PCM, replace the original PCM.n
NO - Intermittent failure, the system is OK at this time.n